Part Number Hot Search : 
4AC37 S505T GP2021 1N5270 STIP10 TP6311 S12864 MAX2630
Product Description
Full Text Search
 

To Download U6262B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 U6262B
DC/DC Converter - Power Supply 20 V
Description
The U6262B is a multifunctional power supply IC which provides four different voltages dedicated to supply components of complex microcontroller systems. Supplied by a battery voltage in the wide range from 6 V to 26 V, the U6229B generates typically 20 V with a step-up converter, PWM, external power MOSFET and 150 mH inductivity. This voltage is fed to a step-down converter with external 150 mH inductivity to generate a 7-V auxiliary voltage with a small ripple. By means of this voltage, two linear regulators with only a small power dissipation provide a constant 5-V (3%) supply for microcontrollers and an even more accurate 5-V (2%) supply as a reference for sensors and a/d converters.
Features
D Voltage outputs
- - - - 20-V step-up converter with I 1.2 A 7-V step-down converter with I mA 5-V logic supply with I mA 5-V reference voltage with I mA
v v400 v14 v14
D Analog input VKL15
- Energy-reserve mode switches off the step-up converter at VBatt < 5.25 V - Controls start-up behavior
D Logic input ENABLE
- Enables the step-up converter
D Logic output NRES
- N-reset output with over/ under voltage monitoring of both 5-V supplies Package SO20 Remarks
Ordering Information
Extended Type Number U6262B
Block Diagram
VBatt 20 V Supply 7V Supply 5V Logic supply 5V Reference supply
VBL
VA1
VHL VH
VCC
VREF
GATE SOURCE
Step-down converter PWM Step-up converter Logic supply Reference voltage
SGND
VKL15
Start-up circuit and over voltage protection ENABLE
Oscillator
Internal reference
Over / under voltage control VCC / VREF AGND NRES
GND
OSC
RSET
13384
Figure 1. Block diagram with external circuit
Rev. A1, 03-Dec-97
1 (2)
Preliminary Information
U6262B
Ozone Depleting Substances Policy Statement
It is the policy of TEMIC Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs). The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. TEMIC Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify TEMIC Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2594, Fax number: 49 ( 0 ) 7131 67 2423
2 (2)
Rev. A1, 03-Dec-97
Preliminary Information


▲Up To Search▲   

 
Price & Availability of U6262B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X